mpd5 - нет коннекта из под windows7

mitsumoto · 16.08.2013, 13:58

Народ всем привет, есть mpd5 сервер который крутится на freebsd 6.4
Могу подключиться по pptp к этому серверу с linux fedora, но с
Windows 7 соединение не устанавливается...

Код:

startup:
        # enable TCP-Wrapper (hosts_access(5)) to block unfriendly clients
        set global enable tcp-wrapper
        # configure the console
        set console self 127.0.0.1 5005
        set user xxx yyy admin
        set console open
        #WEB managment
        set web self 0.0.0.0 5006
        set web enable auth
        set web open
        #Netflow options
        #set netflow peer 127.0.0.1 9996
        #set netflow peer timeouts 60 120
        # Calling-Station-Id = "10.0.4.16 / 00:18:f3:5a:9f:6a / em0"
        set link enable report-mac

default:
        load pptp_client
        load pptp_server

pptp_client:
        create bundle static B1
        set iface up-script /usr/local/etc/mpd5/up.sh
        set iface route default
        set ipcp ranges 0.0.0.0/0 0.0.0.0/0

        set bundle enable compression
        set ccp yes mppc
        set mppc yes e40
        set mppc yes e128
        set bundle enable crypt-reqd
        set mppc yes stateless

        create link static L1 pptp
        set link action bundle B1
        set auth authname "login"
        set auth password "password"
        set link max-redial 0
        set link mtu 1460
        set link keep-alive 20 75

        set pptp peer server_2
        set pptp disable windowing
        open


pptp_server:

        # Define dynamic IP address pool.
        set ippool add pool1 192.168.170.1 192.168.170.254

        # Create clonable bundle template named B
        create bundle template B
        set iface disable proxy-arp
        set iface idle 1800
        set iface enable tcpmssfix
        set iface enable netflow-in netflow-out
        set ipcp yes vjcomp

        # Specify IP address pool for dynamic assigment.
        set ipcp ranges 192.168.170.0/32 ippool pool1
        set ipcp dns <ip_address_provaidera_1> <ip_address_provaidera_2>

        # The five lines below enable Microsoft Point-to-Point encryption
        # (MPPE) using the ng_mppc(8) netgraph node type.
        set bundle enable compression
        set ccp yes mppc
        set mppc yes e40
        set mppc yes e128
        set mppc yes stateless

        # Create clonable link template named L
        create link template L pptp

        # Set bundle template to use
        set link action bundle B

        # Multilink adds some overhead, but gives full 1500 MTU.
        set link enable multilink
        set link yes acfcomp protocomp
        set link no pap chap
        set link enable chap
        set link keep-alive 10 60

	#
	set link fsm-timeout 5    

        # We reducing link mtu to avoid GRE packet fragmentation
        set link mtu 1460

        # Configure PPTP
        set pptp self <ip_address_1>:1723
        set pptp self <ip_address_2>:1723

	set auth max-logins 1
        load server_common

server_common:
        set link enable incoming
        set link no acfcomp protocomp

        load radius

#radius:
        #set radius config /usr/local/etc/raddb/radiusd.conf
	set radius server localhost xxxyyy 1812 1813
        set radius retries 3
        set radius timeout 10
	set radius me 127.0.0.1
        set auth acct-update 300
        set auth enable radius-auth
        set auth enable radius-acct
        set auth disable internal
	set radius enable message-authentic

Через Linux fedora, установка проходит успешно!!!
вол лог сервера что твориться в момент подключения

Код:

Aug 16 14:22:19 root mpd: [L-3] Accepting PPTP connection
Aug 16 14:22:19 root mpd: [L-3] Link: OPEN event
Aug 16 14:22:19 root mpd: [L-3] LCP: Open event
Aug 16 14:22:19 root mpd: [L-3] LCP: state change Initial --> Starting
Aug 16 14:22:19 root mpd: [L-3] LCP: LayerStart
Aug 16 14:22:19 root mpd: [L-3] PPTP: attaching to peer's outgoing call
Aug 16 14:22:19 root mpd: [L-3] Link: UP event
Aug 16 14:22:19 root mpd: [L-3] LCP: Up event
Aug 16 14:22:19 root mpd: [L-3] LCP: state change Starting --> Req-Sent
Aug 16 14:22:19 root mpd: [L-3] LCP: SendConfigReq #1
Aug 16 14:22:19 root mpd: [L-3]   MRU 1500
Aug 16 14:22:19 root mpd: [L-3]   MAGICNUM e6ca1b5d
Aug 16 14:22:19 root mpd: [L-3]   AUTHPROTO CHAP MSOFTv2
Aug 16 14:22:19 root mpd: [L-3]   MP MRRU 2048
Aug 16 14:22:19 root mpd: [L-3]   MP SHORTSEQ
Aug 16 14:22:19 root mpd: [L-3]   ENDPOINTDISC [802.1] 4c 00 10 54 12 6f
Aug 16 14:22:19 root mpd: [L-3] LCP: rec'd Configure Request #1 (Req-Sent)
Aug 16 14:22:19 root mpd: [L-3]   ACCMAP 0x00000000
Aug 16 14:22:19 root mpd: [L-3]   MAGICNUM 7e36a106
Aug 16 14:22:19 root mpd: [L-3]   PROTOCOMP
Aug 16 14:22:19 root mpd: [L-3]   ACFCOMP
Aug 16 14:22:19 root mpd: [L-3] LCP: SendConfigRej #1
Aug 16 14:22:19 root mpd: [L-3]   PROTOCOMP
Aug 16 14:22:19 root mpd: [L-3]   ACFCOMP
Aug 16 14:22:19 root mpd: [L-3] LCP: rec'd Configure Request #2 (Req-Sent)
Aug 16 14:22:19 root mpd: [L-3]   ACCMAP 0x00000000
Aug 16 14:22:19 root mpd: [L-3]   MAGICNUM 7e36a106
Aug 16 14:22:19 root mpd: [L-3] LCP: SendConfigAck #2
Aug 16 14:22:19 root mpd: [L-3]   ACCMAP 0x00000000
Aug 16 14:22:19 root mpd: [L-3]   MAGICNUM 7e36a106
Aug 16 14:22:19 root mpd: [L-3] LCP: state change Req-Sent --> Ack-Sent
Aug 16 14:22:22 root mpd: [L-3] LCP: rec'd Configure Request #2 (Ack-Sent)
Aug 16 14:22:22 root mpd: [L-3]   ACCMAP 0x00000000
Aug 16 14:22:22 root mpd: [L-3]   MAGICNUM 7e36a106
Aug 16 14:22:22 root mpd: [L-3] LCP: SendConfigAck #2
Aug 16 14:22:22 root mpd: [L-3]   ACCMAP 0x00000000
Aug 16 14:22:22 root mpd: [L-3]   MAGICNUM 7e36a106
Aug 16 14:22:24 root mpd: [L-3] LCP: SendConfigReq #2
Aug 16 14:22:24 root mpd: [L-3]   MRU 1500
Aug 16 14:22:24 root mpd: [L-3]   MAGICNUM e6ca1b5d
Aug 16 14:22:24 root mpd: [L-3]   AUTHPROTO CHAP MSOFTv2
Aug 16 14:22:24 root mpd: [L-3]   MP MRRU 2048
Aug 16 14:22:24 root mpd: [L-3]   MP SHORTSEQ
Aug 16 14:22:24 root mpd: [L-3]   ENDPOINTDISC [802.1] 4c 00 10 54 12 6f
Aug 16 14:22:24 root mpd: [L-3] LCP: rec'd Configure Reject #2 (Ack-Sent)
Aug 16 14:22:24 root mpd: [L-3]   MP MRRU 2048
Aug 16 14:22:24 root mpd: [L-3]   MP SHORTSEQ
Aug 16 14:22:24 root mpd: [L-3] LCP: SendConfigReq #3
Aug 16 14:22:24 root mpd: [L-3]   MRU 1500
Aug 16 14:22:24 root mpd: [L-3]   MAGICNUM e6ca1b5d
Aug 16 14:22:24 root mpd: [L-3]   AUTHPROTO CHAP MSOFTv2
Aug 16 14:22:24 root mpd: [L-3] LCP: rec'd Configure Ack #3 (Ack-Sent)
Aug 16 14:22:24 root mpd: [L-3]   MRU 1500
Aug 16 14:22:24 root mpd: [L-3]   MAGICNUM e6ca1b5d
Aug 16 14:22:24 root mpd: [L-3]   AUTHPROTO CHAP MSOFTv2
Aug 16 14:22:24 root mpd: [L-3] LCP: state change Ack-Sent --> Opened
Aug 16 14:22:24 root mpd: [L-3] LCP: auth: peer wants nothing, I want CHAP
Aug 16 14:22:24 root mpd: [L-3] CHAP: sending CHALLENGE #1 len: 21
Aug 16 14:22:24 root mpd: [L-3] LCP: LayerUp
Aug 16 14:22:24 root mpd: [L-3] CHAP: rec'd RESPONSE #1 len: 61
Aug 16 14:22:24 root mpd: [L-3]   Name: "login"
Aug 16 14:22:24 root mpd: [L-3] AUTH: Trying RADIUS
Aug 16 14:22:24 root mpd: [L-3] RADIUS: Authenticating user 'login'
Aug 16 14:22:24 root mpd: [L-3] RADIUS: Rec'd RAD_ACCESS_ACCEPT for user 'login'
Aug 16 14:22:24 root mpd: [L-3] AUTH: RADIUS returned: authenticated
Aug 16 14:22:24 root mpd: [L-3] CHAP: Auth return status: authenticated
Aug 16 14:22:24 root mpd: [L-3] CHAP: Reply message: S=4E695663AC6D8484AF0F76CDDF43CD78E7BE7EC9
Aug 16 14:22:24 root mpd: [L-3] CHAP: sending SUCCESS #1 len: 46
Aug 16 14:22:24 root mpd: [L-3] LCP: authorization successful
Aug 16 14:22:24 root mpd: [L-3] Link: Matched action 'bundle "B" ""'
Aug 16 14:22:24 root mpd: [L-3] Creating new bundle using template "B".
Aug 16 14:22:24 root mpd: [B-3] Bundle: Interface ng2 created
Aug 16 14:22:24 root mpd: [L-3] Link: Join bundle "B-3"
Aug 16 14:22:24 root mpd: [B-3] Bundle: Status update: up 1 link, total bandwidth 64000 bps
Aug 16 14:22:24 root mpd: [B-3] IPCP: Open event
Aug 16 14:22:24 root mpd: [B-3] IPCP: state change Initial --> Starting
Aug 16 14:22:24 root mpd: [B-3] IPCP: LayerStart
Aug 16 14:22:24 root mpd: [B-3] CCP: Open event
Aug 16 14:22:24 root mpd: [B-3] CCP: state change Initial --> Starting
Aug 16 14:22:24 root mpd: [B-3] CCP: LayerStart
Aug 16 14:22:24 root mpd: [B-3] IPCP: Up event
Aug 16 14:22:24 root mpd: [B-3] IPCP: Got IP 192.168.170.2 from pool "pool1" for peer
Aug 16 14:22:24 root mpd: [B-3] IPCP: state change Starting --> Req-Sent
Aug 16 14:22:24 root mpd: [B-3] IPCP: SendConfigReq #1
Aug 16 14:22:24 root mpd: [B-3]   IPADDR 192.168.170.0
Aug 16 14:22:24 root mpd: [B-3]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Aug 16 14:22:24 root mpd: [B-3] CCP: Up event
Aug 16 14:22:24 root mpd: [B-3] CCP: state change Starting --> Req-Sent
Aug 16 14:22:24 root mpd: [B-3] CCP: SendConfigReq #1
Aug 16 14:22:24 root mpd: [B-3]   MPPC
Aug 16 14:22:24 root mpd: [B-3]     0x01000060:MPPE(40, 128 bits), stateless
Aug 16 14:22:24 root mpd: [B-3] CCP: rec'd Configure Request #1 (Req-Sent)
Aug 16 14:22:24 root mpd: [B-3]   DEFLATE
Aug 16 14:22:24 root mpd: [B-3]     0x7800: w:7, m:8, c:0
Aug 16 14:22:24 root mpd: [B-3]   DEFLATE24
Aug 16 14:22:24 root mpd: [B-3]     Not supported
Aug 16 14:22:24 root mpd: [B-3]   BSD
Aug 16 14:22:24 root mpd: [B-3]     Not supported
Aug 16 14:22:24 root mpd: [B-3] CCP: SendConfigRej #1
Aug 16 14:22:24 root mpd: [B-3]   DEFLATE
Aug 16 14:22:24 root mpd: [B-3]     0x7800: w:7, m:8, c:0
Aug 16 14:22:24 root mpd: [B-3]   DEFLATE24
Aug 16 14:22:24 root mpd: [B-3]   BSD
Aug 16 14:22:24 root mpd: [B-3] IPCP: rec'd Configure Request #1 (Req-Sent)
Aug 16 14:22:24 root mpd: [B-3]   COMPPROTO VJCOMP, 16 comp. channels, allow comp-cid
Aug 16 14:22:24 root mpd: [B-3]   IPADDR 0.0.0.0
Aug 16 14:22:24 root mpd: [B-3]     NAKing with 192.168.170.2
Aug 16 14:22:24 root mpd: [B-3]   PRIDNS 0.0.0.0
Aug 16 14:22:24 root mpd: [B-3]     NAKing with ip_address_provaidera_1
Aug 16 14:22:24 root mpd: [B-3]   SECDNS 0.0.0.0
Aug 16 14:22:24 root mpd: [B-3]     NAKing with ip_address_provaidera_2
Aug 16 14:22:24 root mpd: [B-3] IPCP: SendConfigNak #1
Aug 16 14:22:24 root mpd: [B-3]   IPADDR 192.168.170.2
Aug 16 14:22:24 root mpd: [B-3]   PRIDNS ip_address_provaidera_1
Aug 16 14:22:24 root mpd: [B-3]   SECDNS ip_address_provaidera_2
Aug 16 14:22:24 root mpd: [B-3] IPCP: rec'd Configure Ack #1 (Req-Sent)
Aug 16 14:22:24 root mpd: [B-3]   IPADDR 192.168.170.0
Aug 16 14:22:24 root mpd: [B-3]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Aug 16 14:22:24 root mpd: [B-3] IPCP: state change Req-Sent --> Ack-Rcvd
Aug 16 14:22:24 root mpd: [B-3] CCP: rec'd Configure Reject #1 (Req-Sent)
Aug 16 14:22:24 root mpd: [B-3]   MPPC
Aug 16 14:22:24 root mpd: [B-3]     0x01000060:MPPE(40, 128 bits), stateless
Aug 16 14:22:24 root mpd: [B-3] CCP: SendConfigReq #2
Aug 16 14:22:24 root mpd: [B-3] CCP: rec'd Configure Request #2 (Req-Sent)
Aug 16 14:22:24 root mpd: [B-3] CCP: SendConfigAck #2
Aug 16 14:22:24 root mpd: [B-3] CCP: state change Req-Sent --> Ack-Sent
Aug 16 14:22:24 root mpd: [B-3] IPCP: rec'd Configure Request #2 (Ack-Rcvd)
Aug 16 14:22:24 root mpd: [B-3]   COMPPROTO VJCOMP, 16 comp. channels, allow comp-cid
Aug 16 14:22:24 root mpd: [B-3]   IPADDR 192.168.170.2
Aug 16 14:22:24 root mpd: [B-3]     192.168.170.2 is OK
Aug 16 14:22:24 root mpd: [B-3]   PRIDNS ip_address_provaidera_1
Aug 16 14:22:24 root mpd: [B-3]   SECDNS ip_address_provaidera_2
Aug 16 14:22:24 root mpd: [B-3] IPCP: SendConfigAck #2
Aug 16 14:22:24 root mpd: [B-3]   COMPPROTO VJCOMP, 16 comp. channels, allow comp-cid
Aug 16 14:22:24 root mpd: [B-3]   IPADDR 192.168.170.2
Aug 16 14:22:24 root mpd: [B-3]   PRIDNS ip_address_provaidera_1
Aug 16 14:22:24 root mpd: [B-3]   SECDNS ip_address_provaidera_2
Aug 16 14:22:24 root mpd: [B-3] IPCP: state change Ack-Rcvd --> Opened
Aug 16 14:22:24 root mpd: [B-3] IPCP: LayerUp
Aug 16 14:22:24 root mpd: [B-3]   192.168.170.0 -> 192.168.170.2
Aug 16 14:22:24 root mpd: [B-3] IFACE: Up event
Aug 16 14:22:24 root mpd: [B-3] CCP: rec'd Configure Ack #2 (Ack-Sent)
Aug 16 14:22:24 root mpd: [B-3] CCP: state change Ack-Sent --> Opened
Aug 16 14:22:24 root mpd: [B-3] CCP: LayerUp
Aug 16 14:22:24 root mpd: [B-3] CCP: No compression negotiated
Aug 16 14:22:24 root mpd: [B-3] CCP: parameter negotiation failed
Aug 16 14:22:24 root mpd: [B-3] CCP: state change Opened --> Stopping
Aug 16 14:22:24 root mpd: [B-3] CCP: SendTerminateReq #3
Aug 16 14:22:24 root mpd: [B-3] CCP: LayerDown
Aug 16 14:22:24 root mpd: [L-3] RADIUS: Accounting user 'login' (Type: 1)
Aug 16 14:22:24 root mpd: [L-3] RADIUS: Rec'd RAD_ACCOUNTING_RESPONSE for user 'login'
Aug 16 14:22:24 root mpd: [B-3] CCP: rec'd Terminate Ack #3 (Stopping)
Aug 16 14:22:24 root mpd: [B-3] CCP: state change Stopping --> Stopped
Aug 16 14:22:24 root mpd: [B-3] CCP: LayerFinish

Через Windows 7, весит окно проверка имени пользователя и пароля, потом 800 ошибка,
вол лог сервера что твориться в момент подключения

Код:

Aug 16 14:19:20 root mpd: [L-3] Link: OPEN event
Aug 16 14:19:20 root mpd: [L-3] LCP: Open event
Aug 16 14:19:20 root mpd: [L-3] LCP: state change Initial --> Starting
Aug 16 14:19:20 root mpd: [L-3] LCP: LayerStart
Aug 16 14:19:20 root mpd: [L-3] PPTP: attaching to peer's outgoing call
Aug 16 14:19:20 root mpd: [L-3] Link: UP event
Aug 16 14:19:20 root mpd: [L-3] LCP: Up event
Aug 16 14:19:20 root mpd: [L-3] LCP: state change Starting --> Req-Sent
Aug 16 14:19:20 root mpd: [L-3] LCP: SendConfigReq #1
Aug 16 14:19:20 root mpd: [L-3]   MRU 1500
Aug 16 14:19:20 root mpd: [L-3]   MAGICNUM 4fdd7dcd
Aug 16 14:19:20 root mpd: [L-3]   AUTHPROTO CHAP MSOFTv2
Aug 16 14:19:20 root mpd: [L-3]   MP MRRU 2048
Aug 16 14:19:20 root mpd: [L-3]   MP SHORTSEQ
Aug 16 14:19:20 root mpd: [L-3]   ENDPOINTDISC [802.1] 4c 00 10 54 12 6f
Aug 16 14:19:25 root mpd: [L-3] LCP: SendConfigReq #2
Aug 16 14:19:25 root mpd: [L-3]   MRU 1500
Aug 16 14:19:25 root mpd: [L-3]   MAGICNUM 4fdd7dcd
Aug 16 14:19:25 root mpd: [L-3]   AUTHPROTO CHAP MSOFTv2
Aug 16 14:19:25 root mpd: [L-3]   MP MRRU 2048
Aug 16 14:19:25 root mpd: [L-3]   MP SHORTSEQ
Aug 16 14:19:25 root mpd: [L-3]   ENDPOINTDISC [802.1] 4c 00 10 54 12 6f
Aug 16 14:19:30 root mpd: [L-3] LCP: SendConfigReq #3
Aug 16 14:19:30 root mpd: [L-3]   MRU 1500
Aug 16 14:19:30 root mpd: [L-3]   MAGICNUM 4fdd7dcd
Aug 16 14:19:30 root mpd: [L-3]   AUTHPROTO CHAP MSOFTv2
Aug 16 14:19:30 root mpd: [L-3]   MP MRRU 2048
Aug 16 14:19:30 root mpd: [L-3]   MP SHORTSEQ
Aug 16 14:19:30 root mpd: [L-3]   ENDPOINTDISC [802.1] 4c 00 10 54 12 6f
Aug 16 14:19:35 root mpd: [L-3] LCP: SendConfigReq #4
Aug 16 14:19:35 root mpd: [L-3]   MRU 1500
Aug 16 14:19:35 root mpd: [L-3]   MAGICNUM 4fdd7dcd
Aug 16 14:19:35 root mpd: [L-3]   AUTHPROTO CHAP MSOFTv2
Aug 16 14:19:35 root mpd: [L-3]   MP MRRU 2048
Aug 16 14:19:35 root mpd: [L-3]   MP SHORTSEQ
Aug 16 14:19:35 root mpd: [L-3]   ENDPOINTDISC [802.1] 4c 00 10 54 12 6f
Aug 16 14:19:40 root mpd: [L-3] LCP: SendConfigReq #5
Aug 16 14:19:40 root mpd: [L-3]   MRU 1500
Aug 16 14:19:40 root mpd: [L-3]   MAGICNUM 4fdd7dcd
Aug 16 14:19:40 root mpd: [L-3]   AUTHPROTO CHAP MSOFTv2
Aug 16 14:19:40 root mpd: [L-3]   MP MRRU 2048
Aug 16 14:19:40 root mpd: [L-3]   MP SHORTSEQ
Aug 16 14:19:40 root mpd: [L-3]   ENDPOINTDISC [802.1] 4c 00 10 54 12 6f
Aug 16 14:19:45 root mpd: [L-3] LCP: SendConfigReq #6
Aug 16 14:19:45 root mpd: [L-3]   MRU 1500
Aug 16 14:19:45 root mpd: [L-3]   MAGICNUM 4fdd7dcd
Aug 16 14:19:45 root mpd: [L-3]   AUTHPROTO CHAP MSOFTv2
Aug 16 14:19:45 root mpd: [L-3]   MP MRRU 2048
Aug 16 14:19:45 root mpd: [L-3]   MP SHORTSEQ
Aug 16 14:19:45 root mpd: [L-3]   ENDPOINTDISC [802.1] 4c 00 10 54 12 6f
Aug 16 14:19:50 root mpd: [L-3] LCP: SendConfigReq #7
Aug 16 14:19:50 root mpd: [L-3]   MRU 1500
Aug 16 14:19:50 root mpd: [L-3]   MAGICNUM 4fdd7dcd
Aug 16 14:19:50 root mpd: [L-3]   AUTHPROTO CHAP MSOFTv2
Aug 16 14:19:50 root mpd: [L-3]   MP MRRU 2048
Aug 16 14:19:50 root mpd: [L-3]   MP SHORTSEQ
Aug 16 14:19:50 root mpd: [L-3]   ENDPOINTDISC [802.1] 4c 00 10 54 12 6f
Aug 16 14:19:55 root mpd: [L-3] LCP: SendConfigReq #8
Aug 16 14:19:55 root mpd: [L-3]   MRU 1500
Aug 16 14:19:55 root mpd: [L-3]   MAGICNUM 4fdd7dcd
Aug 16 14:19:55 root mpd: [L-3]   AUTHPROTO CHAP MSOFTv2
Aug 16 14:19:55 root mpd: [L-3]   MP MRRU 2048
Aug 16 14:19:55 root mpd: [L-3]   MP SHORTSEQ
Aug 16 14:19:55 root mpd: [L-3]   ENDPOINTDISC [802.1] 4c 00 10 54 12 6f
Aug 16 14:19:57 root mpd: [L-3] PPTP call terminated
Aug 16 14:19:57 root mpd: [L-3] Link: DOWN event
Aug 16 14:19:57 root mpd: [L-3] LCP: Close event
Aug 16 14:19:57 root mpd: [L-3] LCP: state change Req-Sent --> Closing
Aug 16 14:19:57 root mpd: [L-3] LCP: SendTerminateReq #9
Aug 16 14:19:57 root mpd: [L-3] LCP: Down event
Aug 16 14:19:57 root mpd: [L-3] LCP: LayerFinish
Aug 16 14:19:57 root mpd: [L-3] LCP: state change Closing --> Initial
Aug 16 14:19:57 root mpd: [L-3] Link: SHUTDOWN event
Aug 16 14:19:57 root mpd: [L-3] Link: Shutdown

vot · 16.08.2013, 16:24

Aug 16 14:22:24 root mpd: [L-3] CHAP: rec'd RESPONSE #1 len: 61

и

Aug 16 14:19:50 root mpd: [L-3] AUTHPROTO CHAP MSOFTv2

кусок вашего конфига

# Multilink adds some overhead, but gives full 1500 MTU.
set link enable multilink
set link yes acfcomp protocomp
set link no pap chap
set link enable chap
set link keep-alive 10 60

Укажите мне, где в вашем конфиге CHAP MSOFTv2

Рекомендации
Самое простое курить настройки на стороне клиента.

mitsumoto · 17.08.2013, 20:27

Внёс изменения в mpd5 на сервере.

Код:

        # Multilink adds some overhead, but gives full 1500 MTU.
        set link enable multilink
        set link yes acfcomp protocomp
        #set link no pap chap
        #set link enable chap
        set link keep-alive 10 60
	
	#######################
	set link no pap
	set link no chap
	set link no chap-md5
	set link no chap-msv1    
	set link yes chap-msv2
	set link mtu 1500    
	set link fsm-timeout 5

Всё равно через винду 2003, 7 немогу подключиться ошибка таже без изменений, как то странно даже.

vot · 17.08.2013, 21:26

Ещё раз.
Я бы рекомендовал курить настройки на клиенте.
И ещё...
Вчера последнего телепата убили. Убили и съели... А тут надо лог угадать..
А ещё лучше - поставить Mikrotik вместо фряхи и не париться.

Unconnected · 01.09.2013, 11:21

Цитата (vot) »

А ещё лучше - поставить Mikrotik вместо фряхи и не париться.

Не факт, что будет проще в настройке. Это если имеется в виду Mikrotik OS.

Если имеется в виду устройство Mikrotik, то оно ещё и в скорости проиграет.

vot · 01.09.2013, 11:45

Цитата (Unconnected) »

Не факт, что будет проще в настройке. Это если имеется в виду Mikrotik OS.

Если имеется в виду устройство Mikrotik, то оно ещё и в скорости проиграет.

Да ладно!
Сам настраивал и фряху и микротик и сиську и чек пойнт и джунипер и нортел...

На мой взгляд самое лучшее решение CheckPoint.

И?

P.S. Может вы просто не умеете их готовить? (С)

16.08.2013, 16:24	Вверх #2
vot Запрещенный Регистрация: 15.01.2013 Адрес: Москва	Aug 16 14:22:24 root mpd: [L-3] CHAP: rec'd RESPONSE #1 len: 61 и Aug 16 14:19:50 root mpd: [L-3] AUTHPROTO CHAP MSOFTv2 кусок вашего конфига # Multilink adds some overhead, but gives full 1500 MTU. set link enable multilink set link yes acfcomp protocomp set link no pap chap set link enable chap set link keep-alive 10 60 Укажите мне, где в вашем конфиге CHAP MSOFTv2 Рекомендации Самое простое курить настройки на стороне клиента.

17.08.2013, 20:27	Вверх #3
mitsumoto Общительный Автор темы Регистрация: 17.10.2009	Внёс изменения в mpd5 на сервере. Код: # Multilink adds some overhead, but gives full 1500 MTU. set link enable multilink set link yes acfcomp protocomp #set link no pap chap #set link enable chap set link keep-alive 10 60 ####################### set link no pap set link no chap set link no chap-md5 set link no chap-msv1 set link yes chap-msv2 set link mtu 1500 set link fsm-timeout 5 Всё равно через винду 2003, 7 немогу подключиться ошибка таже без изменений, как то странно даже.

17.08.2013, 21:26	Вверх #4
vot Запрещенный Регистрация: 15.01.2013 Адрес: Москва	Ещё раз. Я бы рекомендовал курить настройки на клиенте. И ещё... Вчера последнего телепата убили. Убили и съели... А тут надо лог угадать.. А ещё лучше - поставить Mikrotik вместо фряхи и не париться.

01.09.2013, 11:21	Вверх #5
Unconnected Бывалый Регистрация: 20.07.2004	Цитата (vot) » А ещё лучше - поставить Mikrotik вместо фряхи и не париться. Не факт, что будет проще в настройке. Это если имеется в виду Mikrotik OS. Если имеется в виду устройство Mikrotik, то оно ещё и в скорости проиграет.

01.09.2013, 11:45	Вверх #6
vot Запрещенный Регистрация: 15.01.2013 Адрес: Москва	Цитата (Unconnected) » Не факт, что будет проще в настройке. Это если имеется в виду Mikrotik OS. Если имеется в виду устройство Mikrotik, то оно ещё и в скорости проиграет. Да ладно! Сам настраивал и фряху и микротик и сиську и чек пойнт и джунипер и нортел... На мой взгляд самое лучшее решение CheckPoint. И? P.S. Может вы просто не умеете их готовить? (С)