[kaztip]

Помогите пожалуйста! После сообщения "устройство превышает ограничения по питанию для порта", там требовалось их отключить, причем не один USB порт, а несколько. Я вроде так и сделал, а теперь не пашет ни один порт че только не подключал...принтеры,сканер,телефоны(на Д600 только зарядка идет). Переустановил Винду...НЕ ПОМОГЛО!!! Не в диспетчере, нигде моих пронтеров, телефонов и т.д. не отображает. HELP!

Вот что нарыл в Майкросовте:

"USB Power Exceeded" Error Message When Connecting USB Devices
View products that this article applies to.
This article was previously published under Q254901
SYMPTOMS
When you attach a Universal Serial Bus (USB) device, you may receive a "USB Hub Power Exceeded" error message containing the following text:
The hub does not have enough power available to operate the device driver name. Would you like assistance in solving this problem? If you click No, the device may not function properly.
In addition, the USB device mentioned in the error message does not work properly and the device listing (in the system properties of the Device Manager properties window for the device) appears with the following error message: A USB device has requested more power than the hub can provide. Windows cannot enable the device. Remove the device and restart your computer.
CAUSE
This behavior occurs if there are too many USB devices attached to a passive (unpowered) USB hub.
RESOLUTION
To resolve this issue, replace the passive USB hub with an active (powered) hub.
WORKAROUND
To work around this issue, disconnect the affected device from the passive hub and connect it directly to the USB host controller's hub (in the back of the computer).

НИЧЕ НЕ ПОНЯЛ,мож кто знает что это все означает?
КОМП 4-3000,P4P800,512Mb,80Gb.