Сделал то что там написано, получил тот же результат что и был:
Код:
dany@dany-PC:~$ sudo modprobe it87
dany@dany-PC:~$ sudo modprobe coretemp
FATAL: Error inserting coretemp (/lib/modules/2.6.32-29-generic/kernel/drivers/hwmon/coretemp.ko): No such device
dany@dany-PC:~$ sensors
it8720-isa-0290
Adapter: ISA adapter
in0: +1.28 V (min = +0.00 V, max = +4.08 V)
in1: +1.65 V (min = +0.00 V, max = +4.08 V)
in2: +3.28 V (min = +0.00 V, max = +4.08 V)
in3: +2.98 V (min = +0.00 V, max = +4.08 V)
in4: +1.33 V (min = +0.00 V, max = +4.08 V)
in5: +3.06 V (min = +0.00 V, max = +4.08 V)
in6: +0.99 V (min = +0.00 V, max = +4.08 V)
in7: +2.98 V (min = +0.00 V, max = +4.08 V)
Vbat: +3.10 V
fan1: 1194 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
temp1: +47.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +50.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode
temp3: +80.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
cpu0_vid: +0.000 V
dany@dany-PC:~$
Я так понимаю кортемп надо дополнительно ставить?
Добавлено через 4 минуты
Кстати по
Показывает что проц работает в стоке.
Выполняю
Код:
cpufreq-set -g performance -c 0
Получаю
Код:
dany@dany-PC:~$ cpufreq-set -g performance -c 0
Error setting new values. Common errors:
- Do you have proper administration rights? (super-user?)
- Is the governor you requested available and modprobed?
- Trying to set an invalid policy?
- Trying to set a specific frequency, but userspace governor is not available,
for example because of hardware which cannot be set to a specific frequency
or because the userspace governor isn't loaded?
dany@dany-PC:~$ ^C
dany@dany-PC:~$
